Motorcycle Headlamp Mold
Motorcycle headlamp mold manufacturer in china for information as below shown :
motorcycle headlamp mold supplier Summary One of the difficulties in headlamp mold design is to meet the complex modeling requirements, while also needing to consider the efficiency and cost of production. Here are some ways to overcome the difficulties of motorcycle headlamp mold design:
2. The headlamp mold requires a reasonable cooling system design, especially fully considering the processing accuracy and thermal deformation factors of various parts, including thermal feedback and thermal volume expansion.
3. The reasonable and effective mold structure of headlamp mold adopts suitable manufacturing and processing technology to ensure the precision of the mold and avoid internal stress in the mold manufacturing.
4. For some special lamps, the headlamp mold design needs to be manufactured by resin injection mold, and the headlamp mold needs to be trimmed and cooled.
1. Customize the design of headlamp mold.
2. Fully consider factors such as headlamp mold structure, surface quality, heat resistance, corrosion resistance and production efficiency to obtain optimal mold design and production configuration.
3. Strengthen the control of material selection, processing technology, heat treatment technology, etc. to ensure good quality and high precision of headlamp mold.
4.Headlamp mold design optimizes molding process: Optimizing the molding process of headlamp components and depicting the three-dimensional object can improve the efficiency of the mold, reduce costs and reduce the rate of defective products.
5. Monitoring quality of headlamp mold: In the process of manufacturing headlamp mold, it is necessary to pay close attention to the quality characteristics of the finished product, strengthen the monitoring of the on-site manufacturing process, and make timely adjustments in case of problems to ensure that each part of the headlamp mold meets the specification requirements, so as to achieve The goal of optimal headlamp mold design.
Automotive Motorcycle Lighting Mould Manufacturer
ZheJiang HuangYan Younger Mould Factory is located in China mold town -Huangyan Taizhou.It is a professional plastic mould .Our factory has been established for twenty years ,founded in 1990s .We design and produce Automotive lighting mould. Our products are widely used in Automotive and motorcycle Industry,Such as : headlamp mould ,taillamp mould,BMC mould ,reflector reflex mould ,light guide mould ,thick wall optics mould ect. Younger Mould Factory with advanced CNC machining centers; EDM machines; wiring, machining, and grinding machines, drilling, and molding machines,and some imported equipment. experienced and professional design teams, rich management experience and a strict quality assurance system, we provide customers with comprehensive and high-quality services. People in our company with integrity and responsibility.
Automotive front lighting mould Design Team
Younger Mould have our own engineer team for making 2D and 3D design for headlight mold and taillamp mould .our team hard work on the mould design project has been exceptional,they attention to each detail in the design, the careful consideration of manufacturing processes, and the accuracy of the calculations have all contributed to the success of the project. The mould design is of such high quality that we are able to meet our production goals with ease. Our engineer team's contribution to the mould project has been invaluable.
Lamp Mould Flow Analysis Before Design Mould
There are multiple benefits to MFA As below shown :
Wall thickness defect/Gate location /Mold cavities fill consistently and uniformly/Discover defects in design Process
Avoide expensive machining errors and rework/Improve manufacturability
Reduce Mould making time/Enhance efficiency and Mould quality
Find potential visual defects, air traps, sink marks and weld lines./Analyse different material options
FAQ
Q: Are you mould factory?
Answer: Yes, Younger mould factory is established in 1999 which specialized in making injection mould.
Q: What kind of mould you can make?
Answer:Head lamp mould ,Tail lamp mould, Thick wall mould ,Light guide mould , optics optical mould ,Fog lamp mould ,reflex reflector mould ,license plate lamp mould ,front turn signal lamp mould ,daytime running lamp mould ,high mount stop lamp mould ,transparent parts production lines ect.
Q: What about your payment terms?
Answer: 50% prepayment in advance, and the balance should be paid before shipment.
Q:Mould T0 trial date ?
Answer:We need calulate the date after customer confirm all drawing . mould making date is not including the drawing design date .
Q: How's annual output of your company?
Answer: We can make 200 sets each year.
Q: How about mould machining report ?
Answer:Our engineer team will send the machining report PPT to client on every Friday .
Q: How long of the mould warranty period?
Answer: The mould warranty period for 1 year(Damage caused by human factors or accident are not within the the scope of warranty), 50% spare parts will send to customer for free.
+86 15267697871
younger8@autolightmould.com
